Truck Accessories Storage Units

Hydrogen Fuel Cells: Cars Of The Future
Imagine a world where you don’t have to pay $3 to drive twenty or thirty miles, where trucks belching diesel smoke are unheard of, where you can walk down the road without inhaling the fumes of a thousand vehicles, where thousands of cars pass you and you hear nothing but a gentle hum and whoosh, and you have an idea of where hydrogen fuel cells will be taking us.
Fuel cells were invented in 1839 by Sir William Grove, who figured out that you could separate hydrogen and oxygen from water through hydrolysis, and suggested that the procedure could be reversed to create clean energy, with a by-product of water. Back then, it was called the gas voltaic battery; only in 1889 did it get the name fuel cell.
How Hydrogen Fuel Cells Work
Like batteries, fuel cells use chemical processes without combustion to create energy with a clean by-product. Because they do not work with the process of combustion, fuel cells never have partly used components, and therefore do not produce poisonous by-products (combustion engines produce carbon monoxide and a wide variety of other poisons, in contrast.)
They are very different from batteries in that they are not self-contained. Instead of counting on an enclosed chemical process that ends when all the components are used up, fuel cells have a constant inward flow of their fuel, usually but not always hydrogen and oxygen. In the case of automobile fuel cells, this means you need a storage tank for water or a hydrocarbon fuel and a place where hydrogen can be separated (this place, called a reformer, has its own technological development problems), as well as an exhaust system that directs used water out of the car or back to the original storage tank.
There are several types of fuel cells right now, but currently the most favored model is the polymer exchange membrane fuel cell (PEMFC). This cell uses precious metals like platinum to create atom-thin layers of oxygen and hydrogen. The hydrogen gas, at this time H2, is split into two protons and two electrons at an anode. The electrons are conducted along a path to do useful work – in this case, run your car – before returning to a cathode where they are recombined with their protons and with oxygen, producing water as a by-product. Right now, the typical fuel cell produces less than a single volt of electricity, so several cells must be piled into a stack in order to produce enough energy to do useful work. Currently, the cost of creating each of these volts is prohibitively high, and technology is focused on making fuel cells more cost effective.
The big problem with the fuel cell is separating water into its constituent components to begin with. Elementary physics dictate that you cannot create or destroy energy, and entropy will cause energy to be lost. In addition, you’re using up some of the energy from the fuel cell to run the car. So where does the initial energy to split the water molecules come from?
Currently, instead of using water as a base fuel, we have to use other technologies to produce hydrogen, which is then transferred to the car’s storage tank. This is costly, and we have no infrastructure for delivering hydrogen the way we can deliver gasoline. It’s also dangerous to handle flammable hydrogen in large quantities; remember the Hindenburg?
Freezing and boiling are also problems. Most forms of fuel cells, including the PEMFC, require water to function properly, but if your fuel cell is frozen or heated above 80 degrees Celsius, it may be destroyed.
Who Is Working On Fuel Cells
Researchers all over the world are working on fuel cell technology; it is potentially a very lucrative field. The United States Department of Energy supports many different fuel cell initiatives with block grants, and it also supports work at its own Brookhaven National Laboratory in New York. Most car companies that have a reasonably forward-looking research and development arm are also working to create fuel cells for their own vehicles; this includes companies like Daimler AG, Honda, Ford, and General Motors.
Governments are also becoming increasingly sensitive to the need to have alternative fuel cars. Leading politicians like Newt Gingrich, who is rarely considered a leader in green technology, has spoken out for years about the need for government to support alternative fuel initiatives. Look for this to become the norm in the political future.
When Hydrogen Fuel Cell Cars Will Be Available
We currently have several fuel cell cars in production as prototypes, including the DaimlerChrysler Necar, which drove cross country in 2002 from San Francisco to Washington DC. The trip was beautifully successful despite the extremes in temperature the car had to endure. At that time, Chrysler predicted no fuel cell cars would be available commercially before about 2010.
However, the Honda FXC Clarity is scheduled to be available in limited quantities in late summer 2008, leasing for about $600 a month (they will not be available for sale at all, only lease). It will not use gasoline at all, but instead fill up at hydrogen stations; these stations will be available primarily in Southern California at first. Honda is working on developing home fueling stations that will allow you to generate your own hydrogen at home using electricity.
About the Author
Buy, sell, find, and search for cars for sale, cars parts, and future cars at VehicleRide.
FOR SALE: Complete Pressure Washing Rig – Ready to start making $$
|
|
Stanley Consumer Storage 020800R FatMax 4-in1 Mobile Work Station for Tools and Parts $79.97 4 STORAGE SOLUTIONS IN 1 INCLUDES TOOLBOX PART BINS PORTABLE TRAY & OVERSIZED LOWER BIN FOR LARGER ITEMSPATENTED TIERED CANTILEVER ROLLING SYSTEM ALLOWS EASY ACCESS TO ALL 4 STORAGE AREAS AT THE SAME TIMEDURABLE STRUCTURAL FOAM CONSTRUCTIONLARGE FRONT LATCH LOCKS THE ENTIRE UNITTELESCOPIC HANDLE FOR EASY MANEUVERINGEXTRA LARGE HEAVY-DUTY METAL LATCHES WITH PAD LOCK ABILITYEASY LATCH SYSTEM INCLUDE… |
|
|
Black & Decker JUS500IB 500-Amp Jump Starter with Built-in Tire Inflator $78.99 - 500 Instant starting amps for maximum performance- 120 PSI inflator for vehicle tires sports equipment and more- Ultra bright area light for increased visibility – Low-profile design for easy storage in vehicle or garage- Visual and audible reverse polarity alarms warn against improper connections to battery terminalsBNDJUS500IB… |
|
|
Sunforce 50012 1.8-Watt Solar Battery Maintainer $17.00 The Sunforce 50012 1.8 Watt Solar Battery Maintainer gives you another reason to love the sun — it’ll help keep your car’s battery charged. Just plug this helpful 1.8-watt solar charger into your vehicle’s 12-volt lighter socket and position the panel to pick up the most daylight possible. Or, if you prefer, use the included alligator clips to connect it directly to the battery, so you can keep y… |
|
|
Schumacher SE-1-12S Fully Automatic Onboard Battery Charger – 1.5 Amps $22.45 This Schumacher onboard battery maintainer is fully automatic and is an excellent choice for charging and maintaining 12V batteries. The battery maintainer charges battery in 2-12 hours and automatically switches to float-mode battery monitoring when charging is complete. It provides reverse polarity and overcharge protection and works using standard 120V AC power. Since the maintainer uses short … |
|
|
Auto Exec RoadMaster Car Version ROADCAR-01 $178.50 26″ from back of desk to the front (toward the dash) desktop is 21″ wide from side of desk to the edge closest to the driver. The laptop plate extends the laptop an additional 3.5? Off the edge. The laptop plate itself measures 10? Wide by 6.5? Storage area under the desk: 13.5″ wide, 12″ deep. And 6″ high. Hanging file space – 3.25″ wide and 9″ deep and 12″ across for standard size hanging file f… |
|
|
Schumacher SEM-1562A 1.5 Amp Speed Charge Maintainer $19.00 Float-mode monitoring keeps 6 & 12 volt batteries fully charged; Auto-switch from Full Charge to Float-Mode Monitoring; LEDs indicate: Charging, Charged and Trouble; Quick-Disconnected Harness – Snap connectors in seconds – Use 50-amp clamps or permanently attach to hard to reach areas; Maintain batteries on seasonal equipment; 1.5 amp charger & maintainer; Reverse-polarity protection; Perf… |
|
|
Schumacher SSC-1500A Ship ‘n Shore SpeedCharge Charger with included battery clamps $46.54 SpeedCharge Ship N’ Shore high frequency charger. 2A/10A/15A charger. 75A clamps for top and side mounted battery posts. Electronic push button controls. Easy to feel switches for selection of display mode, charge rate, or battery type. Microprocessor controlled, thermal runaway protection, and safety start. Charging status LED’s. 2A slow charge for charging small batteries and maintaining large o… |
|
|
Duracell DPP-600HD Powerpack 600 Jump Starter & Emergency Power Source with Radio $169.95 The Duracell Powerpack 600 features an internal sealed, non-spillable 28 amp-hour AGM (Absorbed Glass Mat) battery for reliable power delivery and recharging capability. This heavy duty power source operates multiple 120-volt AC household power applications and 12-volt DC applications (charging portable electronics devices) simultaneously with ease. Offering 280 CCA (Cold Cranking Amps) of startin… |
|
|
BRETFORD AV CART ADJ TOP SHELF 4 CASTERS W/3-Outlet Electrical Unit Black Minimal Assembly $349.98 Adjustable Cart adjusts to heights of 26″, 30″, 34″, 38″ and 42″. Black powder paint. (Other premium colors will incur upcharge). Three shelves. Shelf Size: 24″W x 18″D; Middle to Bottom Shelf: 15-1/2″… |
|
|
BRETFORD AV CART WELDED 42H 3 SHELVES Ships Fully Assembled Black W/2-Outlet Electrical Unit $454.98 AV Cart is 42″ high and features three shelves. Black powder paint finish. Recommended for use with up to 20″ diagonal monitors. Shelves measure 24″W x 18″D. The distance between the top and middle shelf is 14-1/2″ while the distance between the middle and bottom shelf is 17-1/2″…. |